Alpes Lasers . TC-3 Manuel d'utilisateur télécharger pdf (Page 21)

TC-3 Temperature Controller User’s Manual · Page 21

Selecting the Fixture

The TC-3 has integrated support for other commencially available

mounts, such as the 204 TEC Butterfly LaserMount. To simplify

operation when using these mounts, you can change the Mount

setting in the menu to the mount type you are using. By selecting a

mount, the current limit, temperature limits, default gain, and sensor

settings are automatically adjusted to values appropriate to the mount,

and menu settings limited to the capabilities of the mount. For

example, when the 204 is selected, the Sensor setting is hidden from

the menu, and the current limit is adjusted to the mount’s rated limit

to prevent damage to the mount’s Peltier cooler.

Adjusting the Mount setting to User Defined removes all software

limits, allowing unrestricted operation of the TC-3.

Remote Mode Operation

Remote mode operation is when the TC-3 is being controlled by a

computer over the USB or RS232 interfaces. When in remote mode, the

TC-3 behaves differently, preventing you from affecting the operation

of the instrument. Some of the primary differences are you will not be

able to change the set point, you cannot enter the menu, and the knob

is disabled.

You can exit remote mode at any time by pressing the MENU button,

which has a secondary function to return the TC-3 to local operation

when in remote mode.

While in remote mode, the Remote LED also acts as an activity

indicator, and will flash whenever there is communication with the

computer.

Details on how to communicate with the TC-3 can be found in a

separate Computer Interfacing Manual, which can be found on the

Arroyo Instruments Website.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Pas de commentaire

Alpes Lasers . TC-3 Manuel d'utilisateur Page 21