Alpes Lasers . TC-3 Manuel d'utilisateur télécharger pdf (Page 9)

TC-3 Temperature Controller User’s Manual · Page 9

Rack Mounting

Rack mounting kits (p/n 1401-RM-1 or p/n 1401-RM-2) for standard

19” racks are available at Arroyo Instruments for the TC-3, and

supports the rack mount of one (1401-RM-1) or two (1401-RM-2)

units in a 2U (3.5”) high opening. Because the unit draws air from the

side, and therefore inside the rack housing, be sure that the internal

rack ambient temperature (which will typically be several degrees

higher than room ambient) does not exceed the unit’s operating

temperature.

Warm-up and Environmental Considerations

In order to achieve the highest level of accuracy, the TC-3 should be

powered on for at least one hour prior to taking measurements. In

addition, ensure that the unit is not operating outside the ambient

temperature range or humidity conditions.

CAUTION

Do not operate the unit above +40°C ambient,

and ensure the instrument is properly ventilated,

or the unit may overheat and possible damage to

the instrument may occur.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Pas de commentaire

Alpes Lasers . TC-3 Manuel d'utilisateur Page 9